Questions sur l'installation et la configuration de Manjaro Linux.

Installer le scanner Brother MFC-L2720DW ?

#21Messageil y a 2 ans

Sous KDE c'est la même chose....

Il faut aller dans la configuration système et cliquer sur "Démarrage/Arrêt" dans le panneau de gauche puis cliquer sur "Ajouter un script".
Tu as, alors, un formulaire qui s'affiche. A droite du champ "Emplacement du script shell", tu as un bouton avec une flèche vers le haut qui te permettra de sélectionner le fichier brscan-skey dans le dossier opt/brother/scanner.

Avant d'utiliser xfce, j'avais Gnome et je suis passer par ce biais, Gnome n'ayant pas d'interface graphique pour gérer ça.
Si j'avais cette "configuration système de KDE" dans mon PC c'est parce que j'ai installer Kdenlive.

Tiens nous au courant si ça fonctionne ou pas.

Installer le scanner Brother MFC-L2720DW ?

#22Messageil y a 2 ans

pymlinux a écrit : il y a 2 ans Tiens nous au courant si ça fonctionne ou pas.
Bonjour,

J'essaye toujours de l'indiquer lorsque mes problèmes sont résolus. :merci:

J'ai trouvé Démarrage/Arrêt.
Pour ajouter un script, j'ai été dans Démarrage automatique
Si je clique sur + Ajouter en bas, il y a le choix entre:
Ajouter une application...
Ajouter un script de connexion...
Ajouter un script de déconnexion...

J'ai choisi ajouter un script de connexion et choisi l'application brscan-skey-0.2.4-0, ça ne marche toujours pas.
J'ai ensuite ajouté une application et choisi brscan-skey ça ne fonctionne pas non plus, même après redémarrage.
J'ai toujours la même réponse Échec de la numérisation Impossible de se connecter au périphérique de numérisation
Je dois être sur la bonne voie, je ne choisi peut-être pas le bon script/application ?

Installer le scanner Brother MFC-L2720DW ?

#23Messageil y a 2 ans

J'ai choisi ajouter un script de connexion et choisi l'application brscan-skey-0.2.4-0, ça ne marche toujours pas.
J'ai ensuite ajouté une application et choisi brscan-skey ça ne fonctionne pas non plus, même après redémarrage.
Enlève le script de démarrage puisque tu as ajouté l'application.

Que se passe-t-il au niveau de l'affichage sur l'écran de ton imprimante lorsque tu appuies sur le bouton scan ?

Chez moi (une dcp-1510) il m'indique d'abord que c'est le mode scanner qui est sélectionné puis il me demande d'appuyer soit sur les flèches pour sélectionner le type de sortie (fichier, image ou email) puis de valider avec la touche OK et enfin d'appuyer sur le bouton Marche et après un message indiquant la connexion avec le pc, ça fonctionne enfin.
Il faut reconnaître que la procédure n'est pas très pratique. C'est bien plus rapide de scanner depuis l'application (skanlite sous kde)
Je pense que ça doit être la même chose avec ton imprimante puisque le programme brscan-skey est le même.

A noter que j'obtiens la même erreur de connexion que toi avec simple-scan (logiciel gtk) mais ça fonctionne parfaitement avec skanlite (logiciel qt).

Installer le scanner Brother MFC-L2720DW ?

#24Messageil y a 2 ans

J'ai viré le script brscan-skey-0.2.4-0 et laissé l'application brscan-skey, mais il y a tellement de fichiers qui portent le même nom que je me demande si j'ai laissé le bon ?
Sur l'écran de mon imprimante je n'ai jamais rien vu d'affiché sous Linux, je n'ai l'affichage que sous Windows, il y a simplement une ligne sous font jaune qui indique ! Vérif. Connexion, après avoir choisi le type de scan, Vers fichier dans mon cas.
skanlite est déjà installé, réponse L'ouverture du périphérique de numérisation sélectionné a échoué. ?
Il faut que l'imprimante indique bien qu'elle est connectée, mais comme elle est déjà connectée au niveau de l'impression ?
N'y aurait-il pas une mauvaise adresse IP, j'ai pris celle dans le menu "TCP/IP Adresse IP=192.168.001.049"
Mais il y en a une autre intitulée "Passerelle=192.168.001.001"

What is the question. :saispas:

Bon ceci dit je vais faire un tour au bord de l'eau, il fait très beau en Finistère, je verrais ça ce soir. :merci:

Installer le scanner Brother MFC-L2720DW ?

#25Messageil y a 2 ans

Chez moi c'est plus simple car elle est connectée en usb et ça fonctionne en lançant uniquement brscan-skey, je pense que c'est du côté de la configuration wifi que ça cloche, peut-être ceci :
Remplace l'adresse IP=192.168.001.049 par 192.168.1.49 en virant tous les zéros initiaux pour obtenir l'adresse courte.
J'ai vu ça dans la doc ubuntu :
https://doc.ubuntu-fr.org/imprimantes_brother
Tu peux y jeter un oeil il y a des infos intéressantes qui peuvent s'appliquer à n'importe quelle distribution linux et tu comprendras mieux le rôle tous ces fichiers dans brscan-skey.
Ils laissent entendre que la configuration du scanner en connexion wifi, c'est pas toujours gagné d'avance avec certaines box.

Installer le scanner Brother MFC-L2720DW ?

#26Messageil y a 2 ans

Ton imprimante est bien en IP fixe ? Cet IP fixe doit être renseigné via le panneau de commande de l'imprimante (tout du moins sur la mienne).
Ensuite je passe par la ligne

sudo brsaneconfig4 -a name=MFC-L2720DW model=MFC-L2720DW ip=192.168.xxxxxx
Autre chose, es-tu sur que ton imprimante accepte brscan4 (il en existe 4 autres de 1 à 5) ?

Pour ma part, je supprimerais tout ce qui concerne l'imprimante puis je n'utiliserais pas le fichier fourni par brother (OK pour les deb ou rpm) mais Pamac.
- j’installerais le fichier brother-mfc-l2720dw de AUR (j'ai vérifié il est bien dispo)
- ensuite j'installerais brscanxxxx avec la version xxxx correspondante à ton imprimante et brscan-skey
- et je reprendrais les ligne de commandes précédemment expliquer.

C'est quand même dingue que cela ne fonctionne pas sur ta config alors que sous Gnome ou Xfce c'est opérationnel.

PS ma brother est en WIFI sur une Box SFR et mon PC est en filaire relié à la Box !

Installer le scanner Brother MFC-L2720DW ?

#27Messageil y a 2 ans

J'ai une imprimante Brother multifonctions en réseau et je viens de vérifier le bon fonctionnement de brscan-skey.
  • il faut d'abord taper dans un terminal sur le PC, la commande "brscan-skey"
    ensuite sur le scanner il faut choisir le menu "numériser" puis dans la liste suivante "numériser vers fichier"
    si tout est bien configuré le nom attribué au PC doit apparaître dans la liste disponible sur l'écran de l'imprimante
    on sélectionne alors ce PC et on appuie sur la commande "Marche" pour lancer la numérisation
    s'il n'y a qu'une page il faut répondre NON à la demande "page suivante?"

    Précisions importantes : avant de vouloir faire fonctionner brscan-skey il faut s'assurer que le scanner en réseau est correctement reconnu et effectuer pour cela des numérisations avec xsane ou tout autre logiciel sous linux
    Enfin si on utilise un pare-feu, la numérisation par brscan-skey nécessite d'ouvrir le port UDP 54925
Si ces conditions sont remplies, ça fonctionne et la numérisation produit un fichier .TIF dans le répertoire /brscan de l'utilisateur.
J'espère que mes explications sont claires et pourront t'aider

Installer le scanner Brother MFC-L2720DW ?

#28Messageil y a 2 ans

Bonjour,

J'ai essayé de répondre le plus précisément possible à vos questions !
jns55 a écrit : il y a 2 ans je pense que c'est du côté de la configuration wifi que ça cloche, peut-être ceci :
Remplace l'adresse IP=192.168.001.049 par 192.168.1.49 en virant tous les zéros initiaux pour obtenir l'adresse courte.
Je modifie cette adresse dans la ligne ci-dessous et aussi sur l'imprimante ?

sudo brsaneconfig4 -a name=MFC-L2720DW model=MFC-L2720DW ip=192.168.xxxxxx
J'ai rentré cette ligne ça ne change rien.

sudo brsaneconfig4 -a name=MFC-L2720DW model=MFC-L2720DW ip=192.168.1.49
jns55 a écrit : il y a 2 ans J'ai vu ça dans la doc ubuntu :
https://doc.ubuntu-fr.org/imprimantes_brother
doc ubuntu a écrit :N’allumez pas votre imprimante avant d’avoir fini l’installation des pilotes, celle-ci risquerait d’être détectée et mal auto-configurée.1)
Réseau opérationnel (pour une installation via Wi-fi ou Ethernet), dans ce cas, assurez-vous :
D’avoir configuré l’imprimante avec votre routeur en IP fixe(reportez-vous au guide d’installation fourni avec votre imprimante). 2)
D’être connecté au même réseau que l’imprimante.
J'ai toujours mis en marche l'imprimante lors de l'installation des pilotes, ce serait déconseillé ?
pymlinux a écrit : il y a 2 ans Ton imprimante est bien en IP fixe ? Cet IP fixe doit être renseigné via le panneau de commande de l'imprimante (tout du moins sur la mienne).
Ensuite je passe par la ligne

sudo brsaneconfig4 -a name=MFC-L2720DW model=MFC-L2720DW ip=192.168.xxxxxx
Avec les zéros ou pas ?
jns55 a écrit :Remplace l'adresse IP=192.168.001.049 par 192.168.1.49 en virant tous les zéros initiaux pour obtenir l'adresse courte.

sudo brsaneconfig4 -a name=MFC-L2720DW model=MFC-L2720DW ip=192.168.1.49
Ni sous Linux, ni sous Windows je n'ai renseigné d'adresse IP, cela c'est fait automatiquement lors de l'installation.
L'adresse IP de l'imprimante est toujours le même, c'est dans quel menu qu'il faut imposer l'IP fixe ?
pymlinux a écrit : il y a 2 ans Autre chose, es-tu sur que ton imprimante accepte brscan4 (il en existe 4 autres de 1 à 5) ?
Où ce trouve cette information, je n'ai rien trouvée.
pymlinux a écrit : il y a 2 ans Pour ma part, je supprimerais tout ce qui concerne l'imprimante puis je n'utiliserais pas le fichier fourni par brother (OK pour les deb ou rpm) mais Pamac.
- j’installerais le fichier brother-mfc-l2720dw de AUR (j'ai vérifié il est bien dispo)
- ensuite j'installerais brscanxxxx avec la version xxxx correspondante à ton imprimante et brscan-skey
- et je reprendrais les ligne de commandes précédemment expliquer.
brother-mfc-l2720dw est installé, c'est la première chose que j'avais faite.
Pour brscanxxx, c'est le (4) qui est installé, je ne sais pas si il est compatible, ni où trouver l'information ?
pymlinux a écrit : il y a 2 ans PS ma brother est en WIFI sur une Box SFR et mon PC est en filaire relié à la Box !
Mon réseau internet est aussi SFR avec la Box +, voir ci-dessous
Je viens également de connecter mon PC en filaire, mais ça ne fonctionne pas mieux, même après redémarrage ?
Jackcapvil a écrit : il y a 2 ans J'ai une imprimante Brother multifonctions en réseau et je viens de vérifier le bon fonctionnement de brscan-skey.
Il faut d'abord taper dans un terminal sur le PC, la commande "brscan-skey"
ensuite sur le scanner il faut choisir le menu "numériser" puis dans la liste suivante "numériser vers fichier"
si tout est bien configuré le nom attribué au PC doit apparaître dans la liste disponible sur l'écran de l'imprimante
on sélectionne alors ce PC et on appuie sur la commande "Marche" pour lancer la numérisation
s'il n'y a qu'une page il faut répondre NON à la demande "page suivante?"
L'écran de l'imprimante n'affiche mon PC que sous Windows !

Je vais essayer de tout rependre depuis zéro, ceci dit, je n'ai pas souvent des documents à scanner. :desole:

Bonne journée à vous tous et encore merci. :merci:

Installer le scanner Brother MFC-L2720DW ?

#29Messageil y a 2 ans

Suite...

Pour infos, je viens de lancer la même procédure d'installation sous mon Ubuntu:

caille@caille-N76VB:~/Téléchargements/linux-brprinter-installer$ sudo bash linux-brprinter-installer-2.2.3-1 MFC-L2720DW
[sudo] Mot de passe de caille : 
You are going to install following packages.
   mfcl2720dwlpr-3.2.0-1.i386.deb
   mfcl2720dwcupswrapper-3.2.0-1.i386.deb
   brscan4-0.4.10-1.amd64.deb
   brscan-skey-0.3.1-2.amd64.deb
OK? [y/N] ->y


=========================================
Brother License Agreement

Brother retains any and all copyrights to the Software. In no case this Agreement shall be construed to assign or otherwise transfer from Brother to User any copyrights or other intellectual property rights to whole or any part of the Software.

Brother grants User a non-exclusive license: to reproduce and/or distribute (via Internet or in any other manner) the Software. Further, Brother grants User a non-exclusive license to modify, alter, translate or otherwise prepare derivative works of the Software and to reproduce and distribute (via Internet or in any other manner) such modification, alteration, translation or other derivative works for any purpose.

The license of the Software from Brother hereunder is granted "AS IS." BROTHER HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
Brother shall have no liability in contract, tort (including negligence or breach of statutory duty) or otherwise for any interruption of use, loss of data, or for any indirect, incidental, punitive or consequential loss or damage, or for any loss of profit, revenue, data, goodwill or anticipated savings that arises under, out of, or in contemplation of this Agreement or otherwise arises due to any error, inaccuracy or defect in the Software even if Brother has been advised of the possibility of such loss or damage.
Further, Brother shall have no liability to disclose and/or distribute the source cord of the Software to User under any circumstances. In no case shall the above license by Brother to modify, alter, translate or otherwise prepare derivative works of the Software be construed as Brother's implied agreement or undertakings to disclose and/or distribute the source cord of the Software.
=========================================
Do you agree? [Y/n] ->y

wget -T 10 -nd --no-cache https://download.brother.com/pub/com/linux/linux/packages/mfcl2720dwlpr-3.2.0-1.i386.deb
--2021-10-16 11:14:44--  https://download.brother.com/pub/com/linux/linux/packages/mfcl2720dwlpr-3.2.0-1.i386.deb
Résolution de download.brother.com (download.brother.com)... 104.87.16.238
Connexion vers download.brother.com (download.brother.com)|104.87.16.238|:443... connecté.
requête HTTP transmise, en attente de la réponse... 200 OK
Taille : 35578 (35K) [text/plain]
Enregistre : «mfcl2720dwlpr-3.2.0-1.i386.deb»

mfcl2720dwlpr-3.2.0-1.i386.deb   100%[=========================================================>]  34,74K  --.-KB/s    ds 0,04s   

2021-10-16 11:14:45 (778 KB/s) - «mfcl2720dwlpr-3.2.0-1.i386.deb» enregistré [35578/35578]


=========================================
GPL License Agreement

This Software may be used in accordance with GNU General Public License (GPL). Please read carefully the following GPL and click on "I Accept" button. If you cannot agree with the following terms, please click "I don't Accept" button. In case of your non-acceptance, you can not use this Software.
Note:
Please click on "I Accept" while holding down "Shift" or right click on "I Accept" and select "Save Target As,,," from the menu.

GNU GENERAL PUBLIC LICENSE
Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc.51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

   1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.

      You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
   2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

      a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

      b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

      c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an
      announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)
      
      These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.

      Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.

      In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
   3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

      a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

      b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

      c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you
      received the program in object code or executable form with such an offer, in accord with Subsection b above.)

      The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

      If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
   4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
   5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying
      the Program or works based on it.
   6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.
   7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.

      If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.

      It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

      This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
   8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
   9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

      Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.
  10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.

<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA


Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision
comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.

<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License.
=========================================

Do you agree? [Y/n] ->

wget -T 10 -nd --no-cache https://download.brother.com/pub/com/linux/linux/packages/mfcl2720dwcupswrapper-3.2.0-1.i386.deb
--2021-10-16 11:14:47--  https://download.brother.com/pub/com/linux/linux/packages/mfcl2720dwcupswrapper-3.2.0-1.i386.deb
Résolution de download.brother.com (download.brother.com)... 104.87.16.238
Connexion vers download.brother.com (download.brother.com)|104.87.16.238|:443... connecté.
requête HTTP transmise, en attente de la réponse... 200 OK
Taille : 19008 (19K) [text/plain]
Enregistre : «mfcl2720dwcupswrapper-3.2.0-1.i386.deb»

mfcl2720dwcupswrapper-3.2.0-1.i3 100%[=========================================================>]  18,56K  --.-KB/s    ds 0,01s   

2021-10-16 11:14:47 (1,69 MB/s) - «mfcl2720dwcupswrapper-3.2.0-1.i386.deb» enregistré [19008/19008]

Atteint :1 http://ppa.launchpad.net/andreasbutti/xournalpp-master/ubuntu focal InRelease
Ign :2 http://repo.vivaldi.com/stable/deb stable InRelease            
Atteint :3 http://mirror.il-jr.kamatera.com/ubuntu focal InRelease                                                       
Atteint :4 http://repo.vivaldi.com/stable/deb stable Release                                                                 
Atteint :5 http://ppa.launchpad.net/dhor/myway/ubuntu focal InRelease                                                        
Atteint :6 http://mirror.il-jr.kamatera.com/ubuntu focal-updates InRelease                                                   
Atteint :7 http://download.opensuse.org/repositories/graphics:/darktable:/master/xUbuntu_20.04  InRelease
Atteint :8 http://ppa.launchpad.net/phoerious/keepassxc/ubuntu focal InRelease
Atteint :9 http://mirror.il-jr.kamatera.com/ubuntu focal-backports InRelease
Atteint :10 http://ppa.launchpad.net/ubuntuhandbook1/audacity/ubuntu focal InRelease
Atteint :11 http://mirror.il-jr.kamatera.com/ubuntu focal-security InRelease
Atteint :12 http://ppa.launchpad.net/ubuntuhandbook1/gimp/ubuntu focal InRelease
Lecture des listes de paquets... Fait
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Aucune version du paquet ia32-libs n'est disponible, mais il existe dans la base
de données. Cela signifie en général que le paquet est manquant, qu'il est devenu obsolète
ou qu'il n'est disponible que sur une autre source
Cependant les paquets suivants le remplacent :
  lib32z1

E: Le paquet « ia32-libs » n'a pas de version susceptible d'être installée
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  dctrl-tools dkms libart-2.0-2 libglade2-0 libgnomecanvas2-0 libgnomecanvas2-common libgsoap-2.8.91 libllvm11 libllvm11:i386
  liblzf1 libmagickcore-6.q16-6 libmagickcore-6.q16-6-extra libmagickwand-6.q16-6 libqrencode4 libqt5concurrent5 libqt5opengl5
  libquazip5-1 libsuil-0-0 libvamp-hostsdk3v5 libvncserver1 libxdamage1:i386 libykpers-1-1 libyubikey-udev libyubikey0 libzxcvbn0
  mpv python3-pyxattr rtmpdump shim
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les paquets supplémentaires suivants seront installés : 
  lib32gcc-s1 libc6-i386
Les NOUVEAUX paquets suivants seront installés :
  lib32gcc-s1 lib32stdc++6 libc6-i386
0 mis à jour, 3 nouvellement installés, 0 à enlever et 50 non mis à jour.
Il est nécessaire de prendre 3 297 ko dans les archives.
Après cette opération, 17,2 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] 
Réception de :1 http://mirror.il-jr.kamatera.com/ubuntu focal-updates/main amd64 libc6-i386 amd64 2.31-0ubuntu9.2 [2 723 kB]
Réception de :2 http://mirror.il-jr.kamatera.com/ubuntu focal-updates/main amd64 lib32gcc-s1 amd64 10.3.0-1ubuntu1~20.04 [49,2 kB]
Réception de :3 http://mirror.il-jr.kamatera.com/ubuntu focal-updates/main amd64 lib32stdc++6 amd64 10.3.0-1ubuntu1~20.04 [525 kB]
3 297 ko réceptionnés en 4s (845 ko/s)  
Sélection du paquet libc6-i386 précédemment désélectionné.
(Lecture de la base de données... 244332 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libc6-i386_2.31-0ubuntu9.2_amd64.deb ...
Dépaquetage de libc6-i386 (2.31-0ubuntu9.2) ...
Remplacés par des fichiers du paquet libc6:i386 (2.31-0ubuntu9.2) déjà installé...
Sélection du paquet lib32gcc-s1 précédemment désélectionné.
Préparation du dépaquetage de .../lib32gcc-s1_10.3.0-1ubuntu1~20.04_amd64.deb ...
Dépaquetage de lib32gcc-s1 (10.3.0-1ubuntu1~20.04) ...
Sélection du paquet lib32stdc++6 précédemment désélectionné.
Préparation du dépaquetage de .../lib32stdc++6_10.3.0-1ubuntu1~20.04_amd64.deb ...
Dépaquetage de lib32stdc++6 (10.3.0-1ubuntu1~20.04) ...
Paramétrage de libc6-i386 (2.31-0ubuntu9.2) ...
Paramétrage de lib32gcc-s1 (10.3.0-1ubuntu1~20.04) ...
Paramétrage de lib32stdc++6 (10.3.0-1ubuntu1~20.04) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-0ubuntu9.2) ...
dpkg -x mfcl2720dwlpr-3.2.0-1.i386.deb /
dpkg -x mfcl2720dwcupswrapper-3.2.0-1.i386.deb /
dpkg-deb: building package 'mfcl2720dwlpr' in 'mfcl2720dwlpr-3.2.0-1a.i386.deb'.
dpkg -b ./brother_driver_packdir mfcl2720dwlpr-3.2.0-1a.i386.deb
dpkg-deb: building package 'mfcl2720dwcupswrapper' in 'mfcl2720dwcupswrapper-3.2.0-1a.i386.deb'.
dpkg -b ./brother_driver_packdir mfcl2720dwcupswrapper-3.2.0-1a.i386.deb
dpkg -i --force-all mfcl2720dwlpr-3.2.0-1a.i386.deb
Sélection du paquet mfcl2720dwlpr:i386 précédemment désélectionné.
(Lecture de la base de données... 244641 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de mfcl2720dwlpr-3.2.0-1a.i386.deb ...
Dépaquetage de mfcl2720dwlpr:i386 (3.2.0-1) ...
Paramétrage de mfcl2720dwlpr:i386 (3.2.0-1) ...
dpkg -i --force-all mfcl2720dwcupswrapper-3.2.0-1a.i386.deb
Sélection du paquet mfcl2720dwcupswrapper:i386 précédemment désélectionné.
(Lecture de la base de données... 244660 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de mfcl2720dwcupswrapper-3.2.0-1a.i386.deb ...
Dépaquetage de mfcl2720dwcupswrapper:i386 (3.2.0-1) ...
Paramétrage de mfcl2720dwcupswrapper:i386 (3.2.0-1) ...
lpadmin -p MFCL2720DW -E -v dnssd://Brother%20MFC-L2720DW%20series._pdl-datastream._tcp.local/ -P /usr/share/ppd/brother/brother-MFCL2720DW-cups-en.ppd
lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS.
#
Will you specify the Device URI? [Y/n] ->


0: beh
1: cups-brf:/
2: hp
3: ipps
4: http
5: ipp
6: socket
7: https
8: lpd
9: hpfax
10: dnssd://Brother%20MFC-L2720DW%20series._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055cf18914
11: ipp://Brother%20MFC-L2720DW%20series._ipp._tcp.local/
12: lpd://BRW90CDB6948F66/BINARY_P1
13 (I): Specify IP address.
14 (A): Auto. (dnssd://Brother%20MFC-L2720DW%20series._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055cf18914)

select the number of destination Device URI. ->13

 enter IP address ->192.168.001.049
lpadmin -p MFCL2720DW -v socket://192.168.001.049 -E
Test Print? [y/N] ->y

wait 5s.
lpr -P MFCL2720DW /usr/share/cups/data/testprint
You are going to install following packages.
   brscan4-0.4.10-1.amd64.deb

=========================================
Brother License Agreement

Brother retains any and all copyrights to the Software. In no case this Agreement shall be construed to assign or otherwise transfer from Brother to User any copyrights or other intellectual property rights to whole or any part of the Software.

Brother grants User a non-exclusive license: to reproduce and/or distribute (via Internet or in any other manner) the Software. Further, Brother grants User a non-exclusive license to modify, alter, translate or otherwise prepare derivative works of the Software and to reproduce and distribute (via Internet or in any other manner) such modification, alteration, translation or other derivative works for any purpose.

The license of the Software from Brother hereunder is granted "AS IS." BROTHER HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
Brother shall have no liability in contract, tort (including negligence or breach of statutory duty) or otherwise for any interruption of use, loss of data, or for any indirect, incidental, punitive or consequential loss or damage, or for any loss of profit, revenue, data, goodwill or anticipated savings that arises under, out of, or in contemplation of this Agreement or otherwise arises due to any error, inaccuracy or defect in the Software even if Brother has been advised of the possibility of such loss or damage.
Further, Brother shall have no liability to disclose and/or distribute the source cord of the Software to User under any circumstances. In no case shall the above license by Brother to modify, alter, translate or otherwise prepare derivative works of the Software be construed as Brother's implied agreement or undertakings to disclose and/or distribute the source cord of the Software.
=========================================
Do you agree? [Y/n] ->y

wget -T 10 -nd --no-cache https://download.brother.com/pub/com/linux/linux/packages/brscan4-0.4.10-1.amd64.deb
--2021-10-16 11:19:32--  https://download.brother.com/pub/com/linux/linux/packages/brscan4-0.4.10-1.amd64.deb
Résolution de download.brother.com (download.brother.com)... 23.57.81.200
Connexion vers download.brother.com (download.brother.com)|23.57.81.200|:443... connecté.
requête HTTP transmise, en attente de la réponse... 200 OK
Taille : 109890 (107K) [text/plain]
Enregistre : «brscan4-0.4.10-1.amd64.deb»

brscan4-0.4.10-1.amd64.deb       100%[=========================================================>] 107,31K  --.-KB/s    ds 0,1s    

2021-10-16 11:19:32 (1,08 MB/s) - «brscan4-0.4.10-1.amd64.deb» enregistré [109890/109890]

dpkg -i --force-all brscan4-0.4.10-1.amd64.deb
Sélection du paquet brscan4 précédemment désélectionné.
(Lecture de la base de données... 244665 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de brscan4-0.4.10-1.amd64.deb ...
Dépaquetage de brscan4 (0.4.10-1) ...
Paramétrage de brscan4 (0.4.10-1) ...
This software is based in part on the work of the Independent JPEG Group.
You are going to install following packages.
   brscan-skey-0.3.1-2.amd64.deb

=========================================
Brother License Agreement

Brother retains any and all copyrights to the Software. In no case this Agreement shall be construed to assign or otherwise transfer from Brother to User any copyrights or other intellectual property rights to whole or any part of the Software.

Brother grants User a non-exclusive license: to reproduce and/or distribute (via Internet or in any other manner) the Software. Further, Brother grants User a non-exclusive license to modify, alter, translate or otherwise prepare derivative works of the Software and to reproduce and distribute (via Internet or in any other manner) such modification, alteration, translation or other derivative works for any purpose.

The license of the Software from Brother hereunder is granted "AS IS." BROTHER HEREBY DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY FOR THE QUALITY, MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR NON-INFRINGEMENT.
Brother shall have no liability in contract, tort (including negligence or breach of statutory duty) or otherwise for any interruption of use, loss of data, or for any indirect, incidental, punitive or consequential loss or damage, or for any loss of profit, revenue, data, goodwill or anticipated savings that arises under, out of, or in contemplation of this Agreement or otherwise arises due to any error, inaccuracy or defect in the Software even if Brother has been advised of the possibility of such loss or damage.
Further, Brother shall have no liability to disclose and/or distribute the source cord of the Software to User under any circumstances. In no case shall the above license by Brother to modify, alter, translate or otherwise prepare derivative works of the Software be construed as Brother's implied agreement or undertakings to disclose and/or distribute the source cord of the Software.
=========================================
Do you agree? [Y/n] ->y

wget -T 10 -nd --no-cache https://download.brother.com/pub/com/linux/linux/packages/brscan-skey-0.3.1-2.amd64.deb
--2021-10-16 11:19:36--  https://download.brother.com/pub/com/linux/linux/packages/brscan-skey-0.3.1-2.amd64.deb
Résolution de download.brother.com (download.brother.com)... 23.57.81.200
Connexion vers download.brother.com (download.brother.com)|23.57.81.200|:443... connecté.
requête HTTP transmise, en attente de la réponse... 200 OK
Taille : 71758 (70K) [text/plain]
Enregistre : «brscan-skey-0.3.1-2.amd64.deb»

brscan-skey-0.3.1-2.amd64.deb    100%[=========================================================>]  70,08K  --.-KB/s    ds 0,07s   

2021-10-16 11:19:36 (961 KB/s) - «brscan-skey-0.3.1-2.amd64.deb» enregistré [71758/71758]

dpkg -i --force-all brscan-skey-0.3.1-2.amd64.deb
Sélection du paquet brscan-skey précédemment désélectionné.
(Lecture de la base de données... 244715 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de brscan-skey-0.3.1-2.amd64.deb ...
Dépaquetage de brscan-skey (0.3.1-2) ...
Paramétrage de brscan-skey (0.3.1-2) ...
apt-get install libusb-0.1-4
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  dctrl-tools dkms libart-2.0-2 libglade2-0 libgnomecanvas2-0 libgnomecanvas2-common libgsoap-2.8.91 libllvm11 libllvm11:i386
  liblzf1 libmagickcore-6.q16-6 libmagickcore-6.q16-6-extra libmagickwand-6.q16-6 libqrencode4 libqt5concurrent5 libqt5opengl5
  libquazip5-1 libsuil-0-0 libvamp-hostsdk3v5 libvncserver1 libxdamage1:i386 libykpers-1-1 libyubikey-udev libyubikey0 libzxcvbn0
  mpv python3-pyxattr rtmpdump shim
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les NOUVEAUX paquets suivants seront installés :
  libusb-0.1-4
0 mis à jour, 1 nouvellement installés, 0 à enlever et 50 non mis à jour.
Il est nécessaire de prendre 17,4 ko dans les archives.
Après cette opération, 58,4 ko d'espace disque supplémentaires seront utilisés.
Réception de :1 http://mirror.il-jr.kamatera.com/ubuntu focal/main amd64 libusb-0.1-4 amd64 2:0.1.12-32 [17,4 kB]
17,4 ko réceptionnés en 0s (38,5 ko/s)    
Sélection du paquet libusb-0.1-4:amd64 précédemment désélectionné.
(Lecture de la base de données... 244735 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libusb-0.1-4_2%3a0.1.12-32_amd64.deb ...
Dépaquetage de libusb-0.1-4:amd64 (2:0.1.12-32) ...
Paramétrage de libusb-0.1-4:amd64 (2:0.1.12-32) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-0ubuntu9.2) ...
brsaneconfig4 -a name=MFC-L2720DW model=MFC-L2720DW ip=192.168.001.049
caille@caille-N76VB:~/Téléchargements/linux-brprinter-installer$ 
La dernière ligne lancée automatiquement est celle-ci:

brsaneconfig4 -a name=MFC-L2720DW model=MFC-L2720DW ip=192.168.001.049
Mais pour le URI j'ai choisi (13) fournir l'adresse IP (192.168.001.049) de l'imprimante, (14) c'était automatique ?

0: beh
1: cups-brf:/
2: hp
3: ipps
4: http
5: ipp
6: socket
7: https
8: lpd
9: hpfax
10: dnssd://Brother%20MFC-L2720DW%20series._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055cf18914
11: ipp://Brother%20MFC-L2720DW%20series._ipp._tcp.local/
12: lpd://BRW90CDB6948F66/BINARY_P1
13 (I): Specify IP address.
14 (A): Auto. (dnssd://Brother%20MFC-L2720DW%20series._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055cf18914)

select the number of destination Device URI. ->13

 enter IP address ->192.168.001.049
lpadmin -p MFCL2720DW -v socket://192.168.001.049 -E
Test Print? [y/N] ->y
L'impression c'est exécutée normalement !
Par contre l'application simple-scan ne fonctionne pas non plus ?
Une autre option aurait-elle été préférable entre (0) et (14) ?
(Je viens de refaire l'installation (URI=14) l'adresse IP est également demandée).

J'ai recommencé l'installation en supprimant les zéros et en choisissant l'option (14) avec les zéros ça ne fonctionne pas.

J'ai aussi installé l'application XSane sous Ubuntu !
Maintenant tout fonctionne sous Ubuntu, plus qu'à faire la même chose sous Manjaro !
Même l'application simple-scan fonctionne sous Ubuntu !

Installer le scanner Brother MFC-L2720DW ?

#30Messageil y a 2 ans

Suite et fin...

PS: J'essaye de placer en [Résolu], mais je reçois l'information "Vous ne pouvez pas accéder à cette page." ?

Je viens de faire la même installation que sous Ubuntu sous Manjaro et ça fonctionne. :bien

1) - Alors pour résumer j'ai pris le Driver Install Tool sur le site de Brother et lancé l'installation
2) - Répondre à la question URI ci-dessous (16)

0: cups-pdf:/
1: http
2: lpd
3: https
4: socket
5: beh
6: ipps
7: cups-brf:/
8: hp
9: ipp
10: smb
11: hpfax
12: dnssd://Brother%20MFC-L2720DW%20series._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055cf18914
13: ipp://Brother%20MFC-L2720DW%20series._ipp._tcp.local/
14: lpd://BRW90CDB6948F66/BINARY_P1
15 (I): Specify IP address.
16 (A): Auto. (dnssd://Brother%20MFC-L2720DW%20series._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055cf18914)

select the number of destination Device URI. ->16

lpadmin -p MFCL2720DW -v dnssd://Brother%20MFC-L2720DW%20series._ipp._tcp.local/?uuid=e3248000-80ce-11db-8000-30055cf18914 -E
3) - Continuer l'installation.
4) - Ensuite donner l'adresse IP sans les zéros (je n'ai toujours pas compris pourquoi).
5) - Lancer simple-scan (ou tout autres applications).
Le scan ne se lance mais pas très vite, mais ça fonctionne avec simple-scan en Ethernet et en Wifi.
Mais toujours aucun affichage sur l'écran de l'imprimante, le principal c'est que cela fonctionne, même sans cet affichage !

En fait c'était très simple... :snif

Bonne journée à vous tous et encore merci. :merci: [Résolu] :pompom::fete::fetard::ivre::biere::café::dormir:

Installer le scanner Brother MFC-L2720DW ?

#31Messageil y a 2 ans

:salut:
Content que tu aies trouvé une solution. N'ayant pas de Brother, je ne n'aurai été utile sur ce fil.
Edit: J'ai passé ton sujet en résolu . Il faudra que je regarde pourquoi tu n'as pu le faire :saispas:

Installer le scanner Brother MFC-L2720DW ?

#32Messageil y a 2 ans

lemust83 a écrit : il y a 2 ans Edit: J'ai passé ton sujet en résolu . Il faudra que je regarde pourquoi tu n'as pu le faire :saispas:
:salut: Merci !

Je recevais cette information:
Bien que ce soit en [Résolu] il y a toujours la coche, l'icône [Résolu] un genre de trombone n'apparaît pas ni la coche verte.
Je parle de l'icône ci-dessous, avec une coche verte, qui n'apparaît que sur la deuxième page de ce sujet sur le scanner Brother.

Installer le scanner Brother MFC-L2720DW ?

#33Messageil y a 2 ans

@caille

j'ai compris que ton scanner fonctionne maintenant correctement avec des applications comme xsane ou simple-scan mais ça ne veut pas dire que tu as résolu le problème du fonctionnement de brscan-skey qui permet de lancer le scan depuis l'imprimante multifonction et pas depuis un logiciel sur le PC.
Il est aussi bien possible que tu considères que tu n'en as pas besoin, et je serais assez d'accord avec toi, mais si tu veux le faire fonctionner c'est possible puisque pour moi tout est OK en réseau.
Le forum "Ubuntu" avec les rubriques spécifiques aux imprimantes et scanners Brother m'a été très utile la première fois que j'ai configuré tout ça. Même si Manjaro n'est pas Ubuntu il y a des analogies dans les paramétrages qui sont assez fortes et je me suis tiré d'affaire grâce aux commentaires sur ce forum.

Installer le scanner Brother MFC-L2720DW ?

#34Messageil y a 2 ans

@Jackcapvil,

Merci pour ton intervention !
Je viens de lancer en ligne de commande brscan-skey
Après quelques secondes j'ai eu caille d'affiché sur l’imprimante. :bien
Le scan s'est bien exécuté et sauvegardé dans mon /home dans le dossier brscan en Tiff !
J'ai redémarré mon PC ainsi que l'imprimante, au bout de quelques secondes j'ai toujours caille d'affiché sur l'écran de l'imprimante.
Elle fonctionne donc comme sous Windows, c'est pour ça que le forum refusait le sujet comme [Résolu]. :lol:

Alors merci pour ta perspicacité. :biere:

Installer le scanner Brother MFC-L2720DW ?

#35Messageil y a 2 ans

Quand vous avez un genre de problème de ce type, que ce soit une imprimante ou un scanner ou bien les deux, la 1ere chose à faire est de vérifier si cela fonctionne en usb. Et comme l'a souligné Jackcapvil, ce sont 2 problèmes différents.

Sinon, je suis content pour toi que cela fonctionne, avec un peu de persévérance. Et vu le monde qui a des brothers ici, cela aurait été le diable que cela ne fonctionne pas. En régle générale, ce sont des problèmes de pilotes. Et n’oublie pas que AUR est ton ami. :aime: Par expérience, je rajouterai Github aussi. :siffle

Et comme l'à bien dis Jackcapvil, :clap c'est bien de ne pas attendre d'en avoir besoin pour ce rendre compte que cela ne marche pas. Perso, je n'ai pas ce soucis vu que je suis uniquement sous Manjaro et ce depuis 8 ans.

Perso, j'avais commencé à créer à la fin de l'année dernière un ensemble de scripts python pour avoir le maximum d'info sur les périphériques qui posent le plus de problèmes cad wifi, imprimantes, scanners, bluethooth.
Malheureusement, suite à des problèmes personnels, je ne les aient pas fini, ni perfectionné (sauf un et encore il n'est pas totalement fini mais presque). Et pour l'instant, je fais des formations Python/Django, j'en ai marre de perdre du temps et de galérer sur des broutilles. A la base je ne suis pas dev mais juste un utilisateur qui aime le code. D'ailleurs, un utilisateur de ce forum fbe m'a aidé.Toutefois, ils sont fonctionnels et de plus ils sont modulables cad qu'ils n'ont qu'un certain nombre de commandes que j'ai jugé utile et donc qu'on peut moduler/adapter afin d'avoir quelque chose de plus complet en en rajoutant.

Le dépôt est sur Github.

Tu le récupéres comme tu veux.

Ce qui donne en CLI:

git clone https://github.com/olielvewen/manjforum
Dans ce dossier tu ouvres un terminal, puis tu tapes la commande suivante:

python pyscannercheck.py
Cela va te donner un fichier pyscannercheck.log qui te donnera toutes les informations sur ton scanner. Si j'en ai oublié ou que je ne connais pas, je me ferai une joie de les mettre. Et quand vous avez un soucis, postez les ici. Cela permettra de gagner du temps et de résoudre plus facilement votre problème matériel. C'est le but.

Installer le scanner Brother MFC-L2720DW ?

#36Messageil y a 2 ans

Installer le scanner Brother MFC-L2720DW ?

#37Messageil y a 2 ans

@lemust

Merci. Surtout que j'ai juste commencé à faire le ménage et que je les ai uploader sur Github il y a juste quelques jours. Depuis le temsp que je voulais faire.....Et comme je suis super rapide. :siffle:roll::siffle:wink:
Et encore, il a fallut que je me plonge dans la doc de Github, ils ont mis des tokens depuis fin Août qui m'y empêchait. :pleure:
Il faudra poster ton script dans Contributions et programmations
Quand ils seront fini, promis. :wink::gsourire:
L'idée était qu'ils soient utilisé systématiquement lors d'un problème de périphérique afin d'avoir le maximun d'info dés le début. Tous les gens ne sont pas expert en CLI mais en n'en ayant qu' une seule, c'est plus pratique pour celui/ceux qui aident.
Après ce n'était que la 1ere étape..... :siffle:siffle A voir.

Installer le scanner Brother MFC-L2720DW ?

#38Messageil y a 2 ans

@Cenwen

très intéressant ton script car il donne énormément d'informations intéressantes, voire indispensable pour résoudre les PB.
J'ai testé avec mon scanner en réseau et obtenu sans Pb les informations souhaitées.
:maître::clap:clap:clap:clap:clap

Installer le scanner Brother MFC-L2720DW ?

#39Messageil y a 2 ans

:salut: Bonjour @Cenwen,
Cenwen a écrit : il y a 2 ans Quand vous avez un genre de problème de ce type, que ce soit une imprimante ou un scanner ou bien les deux, la 1ere chose à faire est de vérifier si cela fonctionne en usb. Et comme l'a souligné Jackcapvil, ce sont 2 problèmes différents.
A partir du moment où je l’avais installée en premier sous Windows et qu'elle a fonctionné de suite en Wifi je n'ai pas cherché à l'essayer en USB sous Linux.
Cenwen a écrit : il y a 2 ans Sinon, je suis content pour toi que cela fonctionne, avec un peu de persévérance. Et vu le monde qui a des Brother ici, cela aurait été le diable que cela ne fonctionne pas. En règle générale, ce sont des problèmes de pilotes. Et n’oublie pas que AUR est ton ami. :aime: Par expérience, je rajouterai Github aussi. :siffle
J'utilise bien sûr AUR et je regarde parfois Github.
Mais je rêve du jour où une installation sous Linux soit aussi facile que sous Windows.
Cenwen a écrit : il y a 2 ans Et comme l'à bien dis Jackcapvil, :clap c'est bien de ne pas attendre d'en avoir besoin pour ce rendre compte que cela ne marche pas. Perso, je n'ai pas ce soucis vu que je suis uniquement sous Manjaro et ce depuis 8 ans.
Entièrement d'accord avec toi. :wink:
J'avais simplement oublié que mon scanner fonctionnait parfaitement avec VueScan, Alzheimer ? :snif
Cenwen a écrit : il y a 2 ans Perso, j'avais commencé à créer à la fin de l'année dernière un ensemble de scripts python pour avoir le maximum d'info sur les périphériques qui posent le plus de problèmes cad wifi, imprimantes, scanners, bluethooth.
Malheureusement, suite à des problèmes personnels, je ne les aient pas fini, ni perfectionné (sauf un et encore il n'est pas totalement fini mais presque). Et pour l'instant, je fais des formations Python/Django, j'en ai marre de perdre du temps et de galérer sur des broutilles. A la base je ne suis pas dev mais juste un utilisateur qui aime le code. D'ailleurs, un utilisateur de ce forum fbe m'a aidé.Toutefois, ils sont fonctionnels et de plus ils sont modulables cad qu'ils n'ont qu'un certain nombre de commandes que j'ai jugé utile et donc qu'on peut moduler/adapter afin d'avoir quelque chose de plus complet en en rajoutant.
Le dépôt est sur Github.
Tu le récupères comme tu veux.
Ce qui donne en CLI:

git clone https://github.com/olielvewen/manjforum
Dans ce dossier tu ouvres un terminal, puis tu tapes la commande suivante:

python pyscannercheck.py
Cela va te donner un fichier pyscannercheck.log qui te donnera toutes les informations sur ton scanner. Si j'en ai oublié ou que je ne connais pas, je me ferai une joie de les mettre. Et quand vous avez un soucis, postez les ici. Cela permettra de gagner du temps et de résoudre plus facilement votre problème matériel. C'est le but.
Voici le résultat chez moi:

[caille@caille-n76vb manjforum]$ python pyscannercheck.py
--------------------------------------------------------------------------------------------------------
pyscannercheck log file for scanner issues and more 0.0.1 - 2021-10-17 15:10:53.119971
--------------------------------------------------------------------------------------------------------
Ce fichier contient un certain nombre de commandes qui permettront, à la fois de fournir suffisament d'information sur la configuration et sur le scanner, afin de pouvoir aider manuellement l'utilisateur à faire fonctionner son scanner et plus encore


--------------------------------------------------------------------------------------------------------
Info Distribution Version
--------------------------------------------------------------------------------------------------------
DISTRIB_ID=ManjaroLinux
DISTRIB_RELEASE=21.1.6
DISTRIB_CODENAME=Pahvo
DISTRIB_DESCRIPTION="Manjaro Linux"


--------------------------------------------------------------------------------------------------------
Info Periphériques Usb
--------------------------------------------------------------------------------------------------------
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 1bcf:2883 Sunplus Innovation Technology Inc. Asus Webcam
Bus 001 Device 003: ID 13d3:3362 IMC Networks Atheros AR3012 Bluetooth 4.0 Adapter
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


--------------------------------------------------------------------------------------------------------
Info Etendues Configuration
--------------------------------------------------------------------------------------------------------
System:    Kernel: 5.14.10-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 Desktop: KDE Plasma 5.22.5 tk: Qt 5.15.2
           wm: kwin_x11 vt: 1 dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:   Type: Laptop System: ASUSTeK product: N76VB v: 1.0 serial: <filter>
           Mobo: ASUSTeK model: N76VB v: 1.0 serial: <filter> UEFI: American Megatrends v: N76VB.205 date: 05/24/2013
Battery:   ID-1: BAT0 charge: 64.8 Wh (100.0%) condition: 64.8/77.7 Wh (83.4%) volts: 11.1 min: 11.1 model: ASUSTeK N56--52
           type: Li-ion serial: N/A status: Full cycles: 777
CPU:       Info: Quad Core model: Intel Core i7-3630QM bits: 64 type: MT MCP arch: Ivy Bridge rev: 9 cache: L2: 6 MiB
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 38333
           Speed: 1457 MHz min/max: 1200/3400 MHz Core speeds (MHz): 1: 1457 2: 1568 3: 2274 4: 1748 5: 1197 6: 1717 7: 1713
           8: 1197
Graphics:  Device-1: Intel 3rd Gen Core processor Graphics vendor: ASUSTeK driver: i915 v: kernel bus-ID: 00:02.0
           chip-ID: 8086:0166 class-ID: 0300
           Device-2: NVIDIA GK107M [GeForce GT 740M] driver: N/A bus-ID: 01:00.0 chip-ID: 10de:0fdf class-ID: 0302
           Device-3: Sunplus Innovation Asus Webcam type: USB driver: uvcvideo bus-ID: 1-1.3:4 chip-ID: 1bcf:2883
           class-ID: 0e02
           Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: loaded: intel resolution: 1600x900~60Hz s-dpi: 96
           OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2) v: 4.2 Mesa 21.2.3 compat-v: 3.0 direct render: Yes
Audio:     Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
           bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403
           Device-2: NVIDIA GK107 HDMI Audio driver: snd_hda_intel v: kernel bus-ID: 01:00.1 chip-ID: 10de:0e1b class-ID: 0403
           Sound Server-1: ALSA v: k5.14.10-1-MANJARO running: yes
           Sound Server-2: JACK v: 1.9.19 running: no
           Sound Server-3: PulseAudio v: 15.0 running: yes
           Sound Server-4: PipeWire v: 0.3.38 running: no
Network:   Device-1: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: AzureWave driver: ath9k v: kernel
           bus-ID: 03:00.0 chip-ID: 168c:0032 class-ID: 0280
           IF: wlp3s0 state: up mac: <filter>
           Device-2: Qualcomm Atheros AR8161 Gigabit Ethernet vendor: ASUSTeK N56VZ driver: alx v: kernel port: d000
           bus-ID: 04:00.0 chip-ID: 1969:1091 class-ID: 0200
           IF: enp4s0 state: down mac: <filter>
Bluetooth: Device-1: IMC Networks Atheros AR3012 Bluetooth 4.0 Adapter type: USB driver: btusb v: 0.8 bus-ID: 1-1.1:3
           chip-ID: 13d3:3362 class-ID: e001 serial: <filter>
           Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Drives:    Local Storage: total: 2.75 TiB used: 44.25 GiB (1.6%)
           ID-1: /dev/sda vendor: Samsung model: SSD 860 PRO 1TB size: 953.87 GiB speed: 6.0 Gb/s type: SSD serial: <filter>
           rev: 2B6Q scheme: GPT
           ID-2: /dev/sdb vendor: Seagate model: ST2000LX001-1RG174 size: 1.82 TiB speed: 6.0 Gb/s type: HDD rpm: 5400
           serial: <filter> rev: SDM1 scheme: GPT
           Optical-1: /dev/sr0 vendor: TSSTcorp model: DVDWBD SN-406AB rev: AS01 dev-links: cdrom
           Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 48.72 GiB used: 25.98 GiB (53.3%) fs: ext4 dev: /dev/sda7 label: manjaro_system
           ID-2: /boot/efi size: 98.4 MiB used: 45.6 MiB (46.3%) fs: vfat dev: /dev/sda1 label: N/A
           ID-3: /home size: 84.47 GiB used: 18.23 GiB (21.6%) fs: ext4 dev: /dev/sda8 label: manjaro_home
Swap:      Alert: No swap data was found.
Sensors:   System Temperatures: cpu: 47.0 C mobo: N/A
           Fan Speeds (RPM): cpu: 2100
Info:      Processes: 252 Uptime: 1m wakeups: 1 Memory: 15.09 GiB used: 1.09 GiB (7.2%) Init: systemd v: 249 Compilers:
           gcc: 11.1.0 alt: 10 clang: 12.0.1 Packages: 1481 apt: 4 pacman: 1477 Shell: Bash v: 5.1.8 running-in: konsole
           inxi: 3.3.07


--------------------------------------------------------------------------------------------------------
Info sur l'utilisation des ports du scanner
--------------------------------------------------------------------------------------------------------
ansanotify        116/tcp
ansanotify        116/udp
sanity            643/tcp
sanity            643/udp
nucleus-sand     1201/tcp
nucleus-sand     1201/udp
intersan         1331/tcp
intersan         1331/udp
fyre-messanger   2731/tcp
fyre-messanger   2731/udp
hp-san-mgmt      3037/tcp
hp-san-mgmt      3037/udp
santak-ups       3038/tcp
santak-ups       3038/udp
casanswmgmt      3669/tcp
casanswmgmt      3669/udp
sanavigator      4033/tcp
sanavigator      4033/udp
santools         4079/tcp
santools         4079/udp
sane-port        6566/tcp
sane-port        6566/udp
sandpolis        8768/tcp
microsan        20001/tcp
microsan        20001/udp


--------------------------------------------------------------------------------------------------------
Affiche le nom du scanner
--------------------------------------------------------------------------------------------------------
device `brother4:net1;dev0' is a Brother MFC-L2720DW MFC-L2720DW
device `v4l:/dev/video0' is a Noname ASUS USB2.0 Webcam: ASUS USB2.0 virtual device



--------------------------------------------------------------------------------------------------------
Test du scanner avec une image
--------------------------------------------------------------------------------------------------------



--------------------------------------------------------------------------------------------------------
Liste toutes les règles udev
--------------------------------------------------------------------------------------------------------
01-md-raid-creating.rules
10-dm.rules
11-dm-lvm.rules
13-dm-disk.rules
39-usbmuxd.rules
40-gphoto.rules
40-usb-media-players.rules
40-usb_modeswitch.rules
50-udev-default.rules
51-android.rules
56-hpmud.rules
60-autosuspend.rules
60-block.rules
60-cdrom_id.rules
60-drm.rules
60-evdev.rules
60-fido-id.rules
60-input-id.rules
60-persistent-alsa.rules
60-persistent-input.rules
60-persistent-storage.rules
60-persistent-storage-tape.rules
60-persistent-v4l.rules
60-rfkill.rules
60-sensor.rules
60-serial.rules
60-tpm-udev.rules
60-vuescan.rules
61-kde-bluetooth-rfkill.rules
63-md-raid-arrays.rules
64-btrfs-dm.rules
64-btrfs.rules
64-md-raid-assembly.rules
65-libwacom.rules
65-sane.rules
66-saned.rules
69-cd-sensors.rules
69-dm-lvm-metad.rules
69-libftdi.rules
69-libmtp.rules
69-md-clustered-confirm-device.rules
69-yubikey.rules
70-infrared.rules
70-joystick.rules
70-memory.rules
70-mouse.rules
70-power-switch.rules
70-printers.rules
70-steam-input.rules
70-steam-vr.rules
70-touchpad.rules
70-uaccess.rules
71-8bitdo-controllers.rules
71-alpha_imaging_technology_co-vr.rules
71-astro_gaming-controllers.rules
71-betop-controllers.rules
71-hori-controllers.rules
71-htc-vr.rules
71-logitech-controllers.rules
71-mad_catz-controllers.rules
71-microsoft-controllers.rules
71-nacon-controllers.rules
71-nintendo-controllers.rules
71-nvidia-controllers.rules
71-pdp-controllers.rules
71-personal_communication_systems_inc-controllers.rules
71-powera-controllers.rules
71-razer-controllers.rules
71-seat.rules
71-sony-controllers.rules
71-sony-vr.rules
71-valve-controllers.rules
71-valve-vr.rules
71-zeroplus_technology_corporation-controllers.rules
73-seat-late.rules
75-net-description.rules
75-probe_mtd.rules
77-mm-broadmobi-port-types.rules
77-mm-cinterion-port-types.rules
77-mm-dell-port-types.rules
77-mm-dlink-port-types.rules
77-mm-ericsson-mbm.rules
77-mm-fibocom-port-types.rules
77-mm-foxconn-port-types.rules
77-mm-gosuncn-port-types.rules
77-mm-haier-port-types.rules
77-mm-huawei-net-port-types.rules
77-mm-longcheer-port-types.rules
77-mm-mtk-port-types.rules
77-mm-nokia-port-types.rules
77-mm-quectel-port-types.rules
77-mm-sierra.rules
77-mm-simtech-port-types.rules
77-mm-telit-port-types.rules
77-mm-tplink-port-types.rules
77-mm-ublox-port-types.rules
77-mm-x22x-port-types.rules
77-mm-zte-port-types.rules
78-sound-card.rules
80-drivers.rules
80-libinput-device-groups.rules
80-mm-candidate.rules
80-net-setup-link.rules
80-udisks2.rules
81-net-dhcp.rules
84-nm-drivers.rules
85-nm-unmanaged.rules
85-regulatory.rules
85-tlp.rules
90-alsa-restore.rules
90-fwupd-devices.rules
90-libgpod.rules
90-libinput-fuzz-override.rules
90-nm-thunderbolt.rules
90-pipewire-alsa.rules
90-pulseaudio.rules
90-udisks2-zram.rules
90-vconsole.rules
95-cd-devices.rules
95-dm-notify.rules
95-upower-hid.rules
95-upower-wup.rules
96-e2scrub.rules
99-bumblebee-nvidia-dev.rules
99-fuse3.rules
99-fuse.rules
99-systemd.rules
README


--------------------------------------------------------------------------------------------------------
Affiche tous les détails dans le fichier listereglescane.txt
--------------------------------------------------------------------------------------------------------



--------------------------------------------------------------------------------------------------------
Fichier de Deboguage Scanner 'pyscannercheck.log'
--------------------------------------------------------------------------------------------------------
Ce script a crée un fichier appelé 'pyscannercheck.log qui contient toutes les sorties des commandes 
affichées au-dessus. Ouvrer ce fichier et poster le sur le forum. Toutes ces informations nous 
aiderons à trouver le plus rapidement la solution à votre problème de scanner. D'autres commandes non incluses 
dans ce fichier seront peut-être necessaire à votre cas.
[caille@caille-n76vb manjforum]$ 

Je n'ai pas compris grand chose aux informations sur mon multifonction Brother. :desole:
Lors de l'exécution de ce script le scanner c'est lancé sans faire de scan, comme si il répondait à une commande ?
L'essentiel c'est qu'il fonctionne aujourd'hui, comme il aurait du fonctionner depuis le 20/03/2020, il n'est jamais trop tard. :bien
Comme quoi sous Linux il faut toujours prendre le temps de faire les choses, mais rien n'est jamais gagné d'avance !

Bon dimanche à toutes et tous. :merci:

Installer le scanner Brother MFC-L2720DW ?

#40Messageil y a 2 ans

J'utilise bien sûr AUR et je regarde parfois Github.
Mais je rêve du jour où une installation sous Linux soit aussi facile que sous Windows.
Sur ce point je ne suis pas d'accord sauf si on aime "et clic et clic...... " et donc ne pas savoir ce que l'on fait ni ont installe. D'autant plus que depuis la build de fin 2019 (initialement réservée aux dev et en console au début) et donc avec Windaube 11en interface graphique), ils disposent d'un app store. Et des bureaux virtuels. Comme quoi, le cancer est pas si mal que ça. Pardon , c'est vrai que maintenant Widnaube aime Linux. :o:shock::mrgreen:

Tout depend si tu as le pilote (ou firmware ou micro-logiciel... :roll: ). Si oui, c'est même encore plus simple puisque tu n'as rien à faire. Tout s'installe tout seul comme ma femme et ma HP il y a quelques années. :o:wink:

Après, cela viendrait plus de Brother qui peine à fournir des pilotes pour que de Linux . Après ils sont sur AUR. Un jeu d'enfant, pas comme si tu devais créer un PKBUILD ou pire tout compiler .
Voici le résultat chez moi:
Ce serait bien de brancher l'imprimante en usb, je ne l'a voit pas avec la commande lsusb.
Mea culpa, c'est en wifi. Et j'avais pas envisager ce cas de figure à l'époque. :o:roll::saispas:

Il manque effectivement le résultat de certaines commandes dans mon script et les plus intéressantes. :siffle On voit bien que celui-là :snif je ne l'avais que commencé. :o:roll:

Je n'ai pas compris grand chose aux informations sur mon multifonction Brother. :desole:
Lors de l'exécution de ce script le scanner c'est lancé sans faire de scan, comme si il répondait à une commande ?
Les 1eres sont plus génériques sur ta distribution, environnement, et complémentaires par rapport à d'autres. La 2eme partie est propre au scanner à plusieurs niveaux, bref partout où on peut avoir des informations afin de trouver le plus rapidement la solution. Il y a souvent plusieurs hypothèses, possibilités qu'il faut tester ou qui nous mettront sur la piste de celle-ci plutôt que de celle-la. Ensemble, elles fournissent assez d'informations pour pouvoir aider la personne qui a des problèmes.
Après, tu peux savoir exactement ce que fait chaque commande dans les commentaires, c'est expliqué et il y a la commande de base, au cas où elle ne fonctionne pas ou que j'oublie :roll: . Avec n'importe quel éditeur, IDE ou plus simplement dans le navigateur web sans extension ou avec (moi c'est Gitako :rigole: )
Je pense que c'est quand il a demandé le nom du scanner, sane a été obligé de se connecter mais par contre il n'a pas scanné une image .....................car elle n'y était pas. C'est la raison.
L'essentiel c'est qu'il fonctionne aujourd'hui, comme il aurait du fonctionner depuis le 20/03/2020, il n'est jamais trop tard.
Si je lis le lien que tu as donné, c'était un soucis d'imprimante qui a d'ailleurs été assez rapidement résolu, malgré le fait que tu as juste donné le nom et le modèle de l'imprimante du carton. Rien si elle était en usb, wifi, ....
Et rien aussi au niveau du scanner. :desole:
:siffle:gsourire:
D'où l'utilité de ce genre de scripts.
Répondre