[raspberry] empêcher la mise en veille

Bonjour,

j'utilise Manjaro sous Mate avec un Raspberry PI 4.
Tout fonctionne très bien: WIFI,Bluetooth...
Je ne parviens cependant pas à empêcher la mise la mise en veille (écran et prolongée).
J'ai bien indiqué dans les préférences de la gestion de l'énergie de ne jamais mettre en vielle ni l'écran, ni l'ordinateur, rien n'y fait.
Au bout de 2mn l'écran se met en veille, avec la nécessité du mot de passe pour en sortir.

Une idée de ce qu'il faut faire ?

Merci pour votre aide! (je n'ai pas vu la question posée sur le forum, j'espère ne pas faire doublon...)

bonjour!

Un petit up...

bonjour

peux tu nous fournir un retour

inxi -Fza

@stéphane excuse-moi je n'avais pas mis la notification et découvre seulement ton message.
Voici ce qui apparait après la commande que tu m'indiques.
Merci pour ton aide (et tous mes voeux pour cette nouvelle année).

System:
  Kernel: 5.15.82-1-MANJARO-ARM-RPI arch: aarch64 bits: 64 compiler: gcc
    v: 12.1.0 parameters: coherent_pool=1M 8250.nr_uarts=0
    snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
    video=HDMI-A-1:640x480M@60 video=HDMI-A-2:1680x1050M@60
    smsc95xx.macaddr=E4:5F:01:9E:4A:BE vc_mem.mem_base=0x3eb00000
    vc_mem.mem_size=0x3ff00000 root=PARTUUID=73e8d9ef-02 rw rootwait
    console=ttyS0,115200 console=tty3 selinux=0 quiet splash
    plymouth.ignore-serial-consoles smsc95xx.turbo_mode=N
    dwc_otg.lpm_enable=0 usbhid.mousepoll=8 audit=0
  Desktop: MATE v: 1.26.0 info: mate-panel wm: marco v: 1.26.1 vt: 7
    dm: LightDM v: 1.32.0 Distro: Manjaro ARM base: Arch Linux
Machine:
  Type: ARM System: Raspberry Pi 4 Model B Rev 1.5 details: BCM2835
    rev: b03115 serial: <filter>
Battery:
  Device-1: hidpp_battery_0 model: Logitech K800 serial: <filter>
    charge: 10% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8
    family: 8 model-id: 0 stepping: 3
  Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB
    desc: d-4x32 KiB; i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB
  Speed (MHz): avg: 1500 min/max: 600/1500 scaling: driver: cpufreq-dt
    governor: schedutil cores: 1: 1500 2: 1500 3: 1500 4: 1500 bogomips: 432
  Features: Use -f option to see features
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:fef00700 class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A
    chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
    class-ID: gpu
  Display: x11 server: X.Org v: 21.1.4 compositor: marco v: 1.26.1 driver:
    X: loaded: modesetting alternate: fbdev dri: vc4
    gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 2480x1050 s-dpi: 96 s-size: 656x278mm (25.83x10.94")
    s-diag: 712mm (28.05")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 note: disabled model: MPI7001
    serial: <filter> built: 2011 res: N/A dpi: 50 gamma: 1.2
    size: 255x255mm (10.04x10.04") diag: 485mm (19.1") ratio: 16:10, 3:2
    modes: max: 800x480 min: 720x400
  Monitor-2: HDMI-A-2 mapped: HDMI-2 pos: primary model: Samsung SyncMaster
    serial: <filter> built: 2008 res: 1680x1050 hz: 60 dpi: 90 gamma: 1.2
    size: 474x296mm (18.66x11.65") diag: 559mm (22") ratio: 16:10 modes:
    max: 1680x1050 min: 720x400
  API: OpenGL v: 2.1 Mesa 22.2.4 renderer: V3D 4.2 direct render: Yes
Audio:
  Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
    class-ID: hdmi
  Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A
    chip-ID: brcm:fef05700 class-ID: hdmi
  Device-3: bcm2835-audio driver: bcm2835_audio bus-ID: N/A
    chip-ID: brcm:bcm2835_audio class-ID: bcm2835_audio
  Sound API: ALSA v: k5.15.82-1-MANJARO-ARM-RPI running: yes
  Sound Server-1: JACK v: 1.9.21 running: no
  Sound Server-2: PulseAudio v: 16.1 running: no
  Sound Server-3: PipeWire v: 0.3.61 running: yes
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fe300000 class-ID: mmcnr
  IF: wlan0 state: up mac: <filter>
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
    chip-ID: brcm:fd580000 class-ID: ethernet
  IF: end0 state: down mac: <filter>
Bluetooth:
  Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000
    class-ID: serial
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
  Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0
    class-ID: serial
  Report: This feature requires one of these tools: hciconfig/bt-adapter
Drives:
  Local Storage: total: 1.82 TiB used: 5.79 GiB (0.3%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 type: USB vendor: Intenso model: SCSI
    size: 1.82 TiB block-size: physical: 4096 B logical: 512 B type: N/A
    serial: <filter> rev: 0209 scheme: MBR
Partition:
  ID-1: / raw-size: 1.82 TiB size: 1.72 TiB (94.38%) used: 5.73 GiB (0.3%)
    fs: ext4 dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot raw-size: 457.8 MiB size: 457.5 MiB (99.94%)
    used: 55.6 MiB (12.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 80 (default 100)
  ID-1: swap-1 type: zram size: 2.7 GiB used: 534 MiB (19.3%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 49.2 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 208 Uptime: 22h 14m Memory: 1.88 GiB used: 1.61 GiB (85.8%)
  gpu: 76 MiB Init: systemd v: 252 default: graphical tool: systemctl
  Compilers: gcc: N/A Packages: pm: pacman pkgs: 715 libs: 206 tools: pamac
  Shell: Bash v: 5.1.16 running-in: mate-terminal inxi: 3.3.24

Merci d'utilser les balises code </> pour les retours de commande.
Edite ton message et regarde comment on fait.

administration/modération

C'est noté pour la mise en forme... Désolé. J'ai compris comment faire.
Quelqu'un a une idée pour empêcher cette mise en veille?

a priori c'est activé s'il ly a un swap créé
https://forum.manjaro.org/t/hibernate-m ... off/129260

de plus il coupe volontairement au niveau consommation energie