Problèmes et questions concernant le noyau et le support matériel.
#1Messageil y a 1 anPc 1 : Manjaro XFCE4 - I3 WM - proco Pentium© Dual-Core CPU E6700 @ 3.20GHz × 2 - Ram 3 Go - HDD 333.6 Go - Carte graph Intel Corporation 82G33/G31 Express Integrated Graphics Controller
Pc 2 : Manjaro KDE : i7 - 16 Go Ram 10 To Hdd Geforge GTX 670 ( Bientôt réinstallation suite déménagement )
#2Messageil y a 1 anbonsoir ,
avec quel noyau as tu ces crash ?
as tu verifié depuis quand tu les as ?
Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#3Messageil y a 1 anMerci pour la réponse et désoler pour le retard j'ai eu beaucoup de boulot.
Kernel :
Linux cyberlux 5.15.85-1-MANJARO #1 SMP PREEMPT Wed Dec 21 21:15:06 UTC 2022 x86_64 GNU/Linux
J'ai beaucoup d'alerte pour la connexion internet vu que je suis vous vpn et quelques crash mais rien d'extraordinaire.
Cela me le fait pas tout le temps mais de temps en temps. Pc 1 : Manjaro XFCE4 - I3 WM - proco Pentium© Dual-Core CPU E6700 @ 3.20GHz × 2 - Ram 3 Go - HDD 333.6 Go - Carte graph Intel Corporation 82G33/G31 Express Integrated Graphics Controller
Pc 2 : Manjaro KDE : i7 - 16 Go Ram 10 To Hdd Geforge GTX 670 ( Bientôt réinstallation suite déménagement )
#4Messageil y a 1 anpourrai tu fournir
inxi -Fza
sudo mhwd-kernel -li
ton profil est il bien à jour ?
as tu effectué les mises à jours recemment ?
je conseille
sudo pacman -Syyu
yay -Syyua
Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#5Messageil y a 1 an
System:
Kernel: 5.15.85-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=b643a956-b16d-4742-9d1c-e95448f835d8 rw quiet apparmor=1
security=apparmor resume=UUID=5d5ba5bd-fd5d-4883-a6b6-58e1390f2428
udev.log_priority=3
Desktop: Xfce v: 4.18.0 tk: Gtk v: 3.24.35 info: polybar wm: i3 v: 4.21.1
vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: SABERTOOTH X79 v: Rev 1.xx
serial: <superuser required> UEFI: American Megatrends v: 4701
date: 05/06/2014
CPU:
Info: model: Intel Core i7-3930K bits: 64 type: MT MCP arch: Sandy Bridge
gen: core 3 level: v2 built: 2010-12 process: Intel 32nm family: 6
model-id: 0x2D (45) stepping: 7 microcode: 0x71A
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
L3: 12 MiB desc: 1x12 MiB
Speed (MHz): avg: 3153 high: 3800 min/max: 1200/5700 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 2204 2: 2500 3: 1891
4: 3511 5: 3800 6: 3800 7: 3800 8: 3800 9: 3800 10: 3800 11: 2048 12: 2882
bogomips: 76828
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GK104 [GeForce GTX 670] vendor: ASUSTeK driver: nvidia
v: 470.161.03 alternate: nouveau,nvidia_drm non-free: series: 470.xx+
status: legacy-active (EOL~2023/24) arch: Kepler code: GKxxx
process: TSMC 28nm built: 2012-18 pcie: gen: 1 speed: 2.5 GT/s lanes: 16
link-max: gen: 2 speed: 5 GT/s bus-ID: 01:00.0 chip-ID: 10de:1189
class-ID: 0300
Display: x11 server: X.Org v: 21.1.6 compositor: Picom v: git-b700a
driver: N/A display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26")
s-diag: 583mm (22.95")
Monitor-1: DVI-I-0 pos: primary res: 1920x1080 hz: 60 dpi: 92
size: 531x299mm (20.91x11.77") diag: 609mm (23.99") modes: N/A
Monitor-2: HDMI-0 size-res: N/A modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 470.161.03 renderer: NVIDIA GeForce GTX
670/PCIe/SSE2 direct render: Yes
Audio:
Device-1: Intel C600/X79 series High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1d20
class-ID: 0403
Device-2: NVIDIA GK104 HDMI Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 16 bus-ID: 01:00.1
chip-ID: 10de:0e0a class-ID: 0403
Sound API: ALSA v: k5.15.85-1-MANJARO running: yes
Sound Server-1: JACK v: 1.9.21 running: no
Sound Server-2: PulseAudio v: 16.1 running: no
Sound Server-3: PipeWire v: 0.3.63 running: yes
Network:
Device-1: Intel 82579V Gigabit Network vendor: ASUSTeK P8P67 Deluxe
driver: e1000e v: kernel port: f040 bus-ID: 00:19.0 chip-ID: 8086:1503
class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
IF-ID-2: vboxnet0 state: down mac: <filter>
Bluetooth:
Device-1: Broadcom BCM20702A0 Bluetooth 4.0 type: USB driver: btusb v: 0.8
bus-ID: 1-1.4:3 chip-ID: 0a5c:21e8 class-ID: fe01 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Drives:
Local Storage: total: 1.13 TiB used: 633.66 GiB (54.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT240BX500SSD1
size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
type: SSD serial: <filter> rev: 041 temp: 24 C scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD10EZEX-00BN5A0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: 1A01 temp: 33 C scheme: GPT
Partition:
ID-1: / raw-size: 922.42 GiB size: 906.86 GiB (98.31%)
used: 633.56 GiB (69.9%) fs: ext4 dev: /dev/sdb2 maj-min: 8:18
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/sdb1 maj-min: 8:17
Swap:
Kernel: swappiness: 10 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8.8 GiB used: 98.6 MiB (1.1%)
priority: -2 dev: /dev/sdb3 maj-min: 8:19
Sensors:
System Temperatures: cpu: 47.0 C mobo: N/A gpu: nvidia temp: 31 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 10%
Info:
Processes: 338 Uptime: 6d 12h 48m wakeups: 0 Memory: 7.7 GiB
used: 3.95 GiB (51.3%) Init: systemd v: 252 default: graphical
tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6 Packages: pm: pacman
pkgs: 1775 libs: 440 tools: pamac,trizen,yay pm: flatpak pkgs: 0 Shell: Zsh
v: 5.9 running-in: alacritty inxi: 3.3.24
Currently running: 5.15.85-1-MANJARO (linux515)
The following kernels are installed in your system:
* linux510
* linux515
pour les maj tout est bien à jour cela ne viens pas de la ( j'ai un cronjob qui vérifie toutes les heures )Pc 1 : Manjaro XFCE4 - I3 WM - proco Pentium© Dual-Core CPU E6700 @ 3.20GHz × 2 - Ram 3 Go - HDD 333.6 Go - Carte graph Intel Corporation 82G33/G31 Express Integrated Graphics Controller
Pc 2 : Manjaro KDE : i7 - 16 Go Ram 10 To Hdd Geforge GTX 670 ( Bientôt réinstallation suite déménagement )
#6Messageil y a 1 anil y a peut être un souci avec le compositeur ou autre
on est passé recemment a Xfce 4.18 , pour xfwm ( standard ) , il y a sans doute des impacts côté picom/polybar/i3 pas encore corrigé.
tu as essayé les noyaux 6.0 et 6.1 ? Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#7Messageil y a 1 anNon je n'ai pas tester le 6 ou le 6.1 car je veux rester avec un noyau LTS.
Cela me la déjà fait avant ces maj donc je ne sais pas trop d’où cela peut venir. Pc 1 : Manjaro XFCE4 - I3 WM - proco Pentium© Dual-Core CPU E6700 @ 3.20GHz × 2 - Ram 3 Go - HDD 333.6 Go - Carte graph Intel Corporation 82G33/G31 Express Integrated Graphics Controller
Pc 2 : Manjaro KDE : i7 - 16 Go Ram 10 To Hdd Geforge GTX 670 ( Bientôt réinstallation suite déménagement )